Sticks around the wheel in Toyota Yarid Hybrid in Show me tell me questions

Right stick in – Правый на себя – Front windscreen spray water + washer wash
Left stick out – Левый от себя – Full beam headlights

Question: How you turn on your dipped headlights
Dipped headlights – First switcher on your left stick with light icon, 2 turns ip does your dipped headlights on
Tip: If it’s a rainy day, you may put dipped headlights on at the beginning of your test, 2 turns up swithes (dipped) headlights on and move on
Sidelights – First switcher on your left stick with light icon, 1 turns up does your sidelights on

Question: How you wash your front windscreen
Push entire right stick up – it does one wiper clean, if you hold it wiper will continue cleaning
Spray water and wash the windscreen – Pull right stick towards you, it will spray water the windscreen and washer automatically will clean it after water. I also should keep spare tyre under back bonnet panel and i must not forget to refit valve caps (Ассоциация: Принцип тот же что и на велосипеде).

Question: How you wash your back windscreen
Spray water to the back windscreen – Turn first switcher on right stick up, it turns on the wiper, turn it 2 times does spray water + wiper. (Seems that if you turn it down to the very end it does water + one wiper as well)

Question: How you turn on your fog lights
Turn on 2nd switched on your left stick up once turns on the front, and one more up it turns on the back fog light – it turns on fog lights, fog lights indicators is in the right panel above where the petrol level is, it shows both front (green) and back (orange) for lights indicators

Question: Tell me how you would know if anti-lock braking system does not function correctly
If the anti-lock braking system does not function correctly i will see anti-lock braking system indicator (ABS) illuminating on the instrument panel (dashboard)

Question: Tell me how you would check that indicator lights working correctly
I turn on hazard warning light and side lights, check the indicators on the panel + i will go around that car and do visual inspection

Question: Tell me how you make sure that head resistant is correctly adjusted
The head resistant should be on the adjusted in a way that rigid part of it on the level of my eyes or top of my ears and it should resist my head comfortably

Question: How will you check if power-assisted steering wheel works correctly
The power assisted steering wheel should become light after engine starts and it is heavy when engine not started (Ассоциация: В детстве в Гяндже в припаркованном желтом жигули в кот. я игрался руль я не мог крутить он был тяжелый, когда мотор запускался он становился легче). If after engine turned on steering wheel still is heavy then something is wrong with power-assisted steering wheel system

Question: How would you check that braking system works correctly
Brakes should not feel spongly or slack and the car should not pull on one side.

Question: How would you check demister control
Turn on front demister (top button to heat the front windscreen ) and back demimster (bottom button – to head the back windscreen), also operate the fan for airflow direction, right salon temperature

Question: How would you check handbrake for excessive wear
Actions: 1st apply the footbrake firmly so that vehicle not rolling forward or backward. 2nd release and re-apply the handbrake. 3rd – remove foot from footbrake
Result: The car should remain stationary and handbrake should not travel too much upwards

Question: How would you check that your car tyres has sufficient thread depth and their general condition are safe
Tyre thread depth should be 1.6 millimeters thread depth across the central three-quarters (3/4) of the wheel all around the wheel.
(Ассоциация: Число 1.6 мне уже знакомо, в 1 километре – 1.6 миль)

Question: How would you check the tyre pressure and what is recommended tyre pressure should be
I can find that information in manufacturer’s manual. I will use reliable pressure gauge and check and adjust tyre pressures when the tyres are cold

Question: How would check if brake lights are working correctly
I will turn on the ignition, press the brakes and use reflection of window or door behind the car to see if brake lights are working correctly. Alternatively, i can ask someone to go behind the car and assist me to check the brake lights

Question: How to check your oil level
Pull the bonnet lever up (in right front of driver’s seat, go out and pull the latch to open bonnet, identify the oil tank, take the oil dipstick, clean it with wipe then put back again and check the level, the level should be between minimum and maximum marks, if it’s not enough add more oil), put back the oil tank cap.

Question: How to check if there is enough brake fluid reservoir
Pull the bonnet lever up, go out, open the bonnet, identify the brake fluid reservoir and check if the liquid inside within min and max marks, add more brake fluid if necessary, put back the oil fluid cap

Question: How to check if there is enough brake fluid reservoir
Pull the bonnet lever up, go out, open the bonnet, identify the brake fluid reservoir and check if the liquid inside within min and max marks, add more brake fluid if necessary, put back the oil fluid cap

Question: How to check if there is enough engine coolant reservoir
Pull the bonnet lever up, go out, open the bonnet, identify the engine coolant reservoir and check if the liquid inside within min and max marks, add more engine coolant if necessary, put back the oil fluid cap

Question: How to check if there is enough windscreen washer reservoir
Pull the bonnet lever up, go out, open the bonnet, identify the windscreen washer reservoir and check if the liquid inside within min and max marks, add more windscreen washer if necessary, put back the oil fluid cap

Dipped headlights



Demister and fan controls explanation, also fog headlights